UF99055 Compressor Kit - Replaces 990-230

Tecumseh, York Upright to Sanden Conversion Kit, Replaces York, Tecumseh Upright Compressors
York, Tecumseh to Sanden Conversion Kit

Replaces York/Techumseh compressors equipped with 2-groove clutch and left hand tube o-ring fittings

Fits FORD NEW HOLLAND: 8700 (01/01/1979 and Newer With Tube O Compressor), 9700 (01/01/1979 and Newer With Tube O Compressor), TW5 (01/01/1982 to 03/31/1984), TW10 (01/01/1979 and Newer With Tube O Compressor), TW15 (01/01/1982 to 03/31/1984), TW20 (01/01/1979 and Newer With Tube O Compressor), TW25 (01/01/1982 to 03/31/1984), TW30 (01/01/1979 and Newer With Tube O Compressor), TW35 (01/01/1982 to 03/31/1984)

Specifications
COMPRESSOR 509-571
MOUNTING HARDWARE Yes
BELT No
BINARY SWITCHES 220-1022
COMPRESSOR MANIFOLD 451-1153
SERVICE VALVES No
RETROFIT ADAPTERS No
HOSES 7-19N601CA, 7-9N617AA-S
O-RINGS 440-013, 440-015, 440-023
MOUNTING BRACKET 995-205

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge