UA98216 Compressor, Heavy Duty - Replaces SE501456

New Heavy Duty A6 Delco Replacement Compressor with Dust Protection

Replaces number UM7004, UA98216, 70256782, 70272002, 70269745, 70262126, SE501456, SE501457, TY6665, TY6770, 586126M91, 533713M91, SE503046, SE503047, 500-075

Fits JOHN DEERE: 2355, 2555, 2755, 2855N, 2955, 3155,
2350, 2550, 2750, 2950
2940
4520
4030, 4230, 4430, 4630
4040, 4240, 4440, 4640, 4840
7520-4WD

Fits ALLIS CHALMERS: 200, 210, 220, 7000, 7010, 7020, 7040, 7050, 7060, 7080

Fits MASSEY FERGUSON: 1080 (Must Identify Clutch Diameter), 1085 (Must Identify Clutch Diameter), 1100 (Must Identify Clutch Diameter), 1105 (Must Identify Clutch Diameter), 1130 (Must Identify Clutch Diameter), 1135 (Must Identify Clutch Diameter), 1150 (Must Identify Clutch Diameter), 1155 (Must Identify Clutch Diameter), 1805 (Must Identify Clutch Diameter), 2640 (Must Identify Clutch Diameter), 2675 (Must Identify Clutch Diameter), 2705 (Must Identify Clutch Diameter), 2745 (Must Identify Clutch Diameter), 2775 (Must Identify Clutch Diameter), 2805 (Must Identify Clutch Diameter), 3505 (Must Identify Clutch Diameter), 3525 (Must Identify Clutch Diameter), 3545 (Must Identify Clutch Diameter), 4800 (Must Identify Clutch Diameter), 4840 (Must Identify Clutch Diameter), 4880 (Must Identify Clutch Diameter), 4900 (Must Identify Clutch Diameter)

Uses Original Belt & Hoses, Can be Used for 10 O’Clock and 2 O’Clock Coil Positions, Includes HD Dust Protection and Metric Bolt Kit

Replaces A6 With 10PA20 HD 10 Cylinder Denso, Uses Less Power for Greater Efficiency

Specifications
COMPRESSOR TYPE 10PA20HD
HEAD TYPE Superheat
OIL TYPE Pag 46
CLUTCH Diameter 5.58"
VOLTAGE 12
GROOVES 1
BELT WIDTH 1/2"
MOUNTING holes Metric Thread
OIL QUANTITY 7.4 oz

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge