UA98311 Compressor - Replaces 72201567

Sanden Compressor SD5H14 - 132mm, 2 Groove Clutch 12V, Heavy Duty 5 Piston Design
3 1/4" Front to Rear Inside Ear Measurement

Replaces UW0116, UA98311, 72201567, 72162168, 30-3373029, 509-427

Fits ALLIS CHALMERS: 6670 (SN 1154 and Above), 6680 (SN 1317 and Above), 6690 (SN 1929 and Above), 7600 (SN 1387 and Above), 8610 (SN 1389 and Above), 7650 (SN 1016 and Above), 8630 (SN 1509 and Above)

Fits WHITE: 2-88, 2-110, 2-135(SN 299208 and Above), 2-155(SN 299208 and Above), 2-180(SN 301922 and Above), 100, 120, 125, 140, 145, 160, 170, 185, 195, 6105(SN 1402 and Above), 6125(SN 622000 and Below), 6145(SN 642000 and Below), 6175(SN 661000 and Below), 6195(SN 681000 and Below), 60 Series, 80 Series

3 1/4" Front to Rear Inside Ear Measurement
Heavy Duty 5 Piston Design

Specifications
COMPRESSOR TYPE SD5H14HD
HEAD TYPE C
OIL TYPE R134 Pag Oil
CLUTCH DIAMETER 132mm, 5.19"
VOLTAGE 12
GROOVES 2
BELT WIDTH 1/2"
COIL POSITION N/A
OIL QUANTITY 207cc, 6.99oz.
GAUGE LINE 39.55mm

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge