UF999960 Compressor - Replaces 82008688

Compressor, SD7H15, 119mm, 6 Groove Clutch 12V

Replaces: 82016157, 82008688, 509-5463

Fits FORD NEW HOLLAND: TS90, TS100, TS110, TS115,
5640 (11/01/1995 and Newer), 6640 (11/01/1995 and Newer), 7740 (11/01/1995 and Newer), 7840 (11/01/1995 and Newer), 8240 (11/01/1995 and Newer), 8340 (11/01/1995 and Newer), TS90 (11/01/1995 and Newer), TS100 (11/01/1995 and Newer), TS110(11/01/1995 and Newer), TS115(11/01/1995 and Newer)

Compressor SD7H15, 4 11/16" 6 Groove Clutch, Vertical 8 and 10 O-Ring
CAN ALSO USE UF990560 Original Sanden

Specifications
COMPRESSOR TYPE SD7H15
HEAD TYPE JE
OIL TYPE Pag Oil
CLUTCH DIAMETER 119mm, 4.68"
VOLTAGE 12
GROOVES 6
BELT WIDTH Serpentine
COIL POSITION N/A
OIL QUANTITY Drain Assembly Oil
GAUGE LINE 38.00C, 46.00F

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge