UJCB999998 Compressor - Replaces 477/42400

Sanden SD7H15 5 1/4" 2 Groove Clutch Vertical 8 x 10 O-Ring

Replaces 477/42400, A22-41179-000, 1012-21711, 206RD413M, 123/04998, 22-41179-000, 59-2004

Fits JCB: Fastrac 125, 135T, 155T, 165 (SN 635994 and Above), 185 (SN 635994 and Above), 185Ti (SN 635994 and Above), 1115, 1125, 1135, 2115, 2125, 2135, 2140, 2150, 3155, 3170, 3185, 3190, 3220, 8250

Original Equipment Sanden,
Heavy Duty Clutch
3 1/4" Front to Rear Inside Ear Measurement
Can Use Aftermarket Sanden - 59-2004AP

Specifications
COMPRESSOR TYPE SD7H15
HEAD TYPE JD
OIL TYPE R134 100 Pag
CLUTCH DIAMETER 132 mm, 5.19"
VOLTAGE 12
GROOVES 2
BELT WIDTH 1/2"
OIL QUANTITY 240 cc, 8.11 oz.
GAUGE LINE 39.55 mm

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge