UM7000 A6 to Sanden Conversion - Replaces 990-500

A6 to Sanden Conversion Kit
Adapts to The Original A6 Mounting Brackets
Kit allows for the use of the original hoses

Replaces 990-500

Fits MASSEY FERGUSON:
1080 (Brackets Mount to Original A6 Mounting Brackets),
1085 (Brackets Mount to Original A6 Mounting Brackets),
1100 (Mounts to Original Compressor Mounting Brackets),
1105 (Mounts to Original Compressor Mounting Brackets),
1130 (Mounts to Original Compressor Mounting Brackets),
1135 (Mounts to Original Compressor Mounting Brackets),
1150 (Brackets Mount to Original A6 Mounting Brackets),
1155 (Brackets Mount to Original A6 Mounting Brackets),
2640 (S# L178202 and Below With A6 Compressor),
2675 (Brackets Mount to Original A6 Mounting Brackets),
2705 (Brackets Mount to Original A6 Mounting Brackets),
2745 (Brackets Mount to Original A6 Mounting Brackets),
2775 (Brackets Mount to Original A6 Mounting Brackets),
2805 (Brackets Mount to Original A6 Mounting Brackets),
3505 (Brackets Mount to Original A6 Mounting Brackets),
3525 (S# L178202 and Below With A6 Compressor),
3545 (S# L178202 and Below With A6 Compressor),
4800 (Brackets Mount to Original A6 Mounting Brackets),
4840 (Brackets Mount to Original A6 Mounting Brackets),
4880 (Brackets Mount to Original A6 Mounting Brackets),
4900 (Brackets Mount to Original A6 Mounting Brackets)

Specifications
COMPRESSOR 509-571-1
MOUNTING HARDWARE Yes
BELT No
BINARY SWITCHES 530-4030
COMPRESSOR MANIFOLD 451-11602
SERVICE VALVES No
RETROFIT ADAPTERS No
HOSES No
O-RINGS 440-211
MOUNTING BRACKET 995-435

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge