UW0119 Compressor - Replaces 72162168

Compressor SD7H15 - 132mm, 2 Groove Clutch 12V

Replaces: UA98314, UW0119, UF999946, 47132887, 72275276, 72201567, 30-3373029, 509-5553

Fits FORD NEW HOLLAND: TL80A, TL90A, TL100A, TN85DA, TN85SA, TN95DA

Fits CASE INTERNATIONAL: JX1080U, JX1090U, JX1100U

Fits ALLIS CHALMERS: 6670 (SN 1154 and Above), 6680 (SN 1317 and Above), 6690 (SN 1929 and Above), 7600 (SN 1387 and Above), 7630 (SN 1066 and Above), 7650 (SN 1016 and Above), 8610 (SN 1389 and Above), 8630 (SN 1509 and Above)

Fits WHITE: 2-88, 2-110, 2-135(SN 299208 and Above), 2-155(SN 299208 and Above), 2-180(SN 301922 and Above), 100, 120, 125, 140, 145, 160, 170, 185, 195, 6105(SN 1402 and Above), 6124, 6144, 6145(SN 642001 and Above), 6125(SN 622001 and Above), 6175(CHECK SERIAL NUMBER), 6195(SN 681001 and Above)
Fits: 60 Series, 80 Series

Specifications
HEAD TYPE CB
OIL TYPE Pag Oil
CLUTCH DIAMETER 132mm, 5.19"
GROOVES 2
BELT WIDTH 1/2"
COIL POSITION N/A
VOLTAGE 12
COMPRESSOR TYPE SD7H15
GAUGE LINE 39.55mm

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge