UJD999681 Compressor Replacement Kit - RE12513

HD Sanden Style Denso 7H15 - 146mm, Single Groove Clutch, 12V

Replaces RE12513, AR99850, RE57936, AH116654, 503-117

Fits JOHN DEERE: 4055, 4255, 4455, 4555
4755 (Serial Number 010678 and Below)
4955 (Serial Number 010370 and Below)
4050, 4250, 4450, 4650, 4850

Will Not Fit John Deere Models 2250, 2450, 2650, 2650N, 2850, 2355,
2555, 2755, 2855N, 2955, 3050, 3350, 3650, 3055, 3155, 3255 With John Deere AL63652 Compressor Mounting Bracket

Sanden Style Version of Original 6E171 Denso

Specifications
COMPRESSOR TYPE 7H15
OIL TYPE Assembly Oil
CLUTCH DIAMETER 5.76"
VOLTAGE 12
GROOVES 1
BELT WIDTH .50, 1/2"
COIL POSITION 12 o’clock
OIL QUANTITY 6.5 oz.
GAUGE LINE 47.5mm, 1.86"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge