2. 2634 Audrain Road 381, Mexico, Missouri 65265
  4. Home
  5. View Cart
  6. Checkout
  1. 888-414-4043
  2. Store Policies
  3. Contact Us
  4. Search
 

Walt's Tractor Parts | John Deere Tractor Parts -- | John Deere Cab Parts - | Air Conditioning Parts |  Compressor

Compressor

UJD999619 Compressor - Replaces RE284680

UJD999619 Compressor - Replaces RE284680
Alternative Denso Compressor 10SRE18C - 125.5mm, 8 Groove Clutch, 12V

Replaces RE284680, SE502697, 503-1663

Fits JOHN DEERE:
6105D,
6115D(SN 050001 & above),
6130D(SN 050001 & above),
6140D,
6105M, 6110M, 6115, 6120M, 6125M, 6130M, 6140M, 6150M, 6155M, 6170M, 6175M,
6105R, 6115R, 6125R, 6140R, 6145R, 6150R, 6155R, 6170R, 6175R, 6190R, 6210R
5085E, 5100E,
5101E(SN 340001 and Above),
5065M(SN 347000 and Above)
5095M (SN 347000 and Above),
5100M, 5100MH

Specifications
COMPRESSOR TYPE 10SRE18C
HEAD TYPE Direct Mount
OIL TYPE R134 Pag 46
CLUTCH DIAMETER 125.5mm, 4.941"
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
COIL POSITION N/A
GAUGE LINE 64mm, 2.52"C

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $335.00

UJD999626 Compressor Denso - Replaces RE284680

UJD999626 Compressor Denso - Replaces RE284680
OE Denso Compressor 10SRE18C - 125.5mm, 8 Groove Clutch, 12V

Replaces RE284680, SE502697, 503-166

Fits JOHN DEERE:
6105D,
6115D(SN 050001 & above),
6130D(SN 050001 & above),
6140D,
6105M, 6110M, 6115, 6120M, 6125M, 6130M, 6140M, 6150M, 6155M, 6170M, 6175M,
6105R, 6115R, 6125R, 6140R, 6145R, 6150R, 6155R, 6170R, 6175R, 6190R, 6210R
5085E, 5100E,
5101E(SN 340001 and Above),
5065M(SN 347000 and Above)
5095M(SN 347000 and Above),
5100M, 5100MH

Specifications
COMPRESSOR TYPE 10SRE18C
HEAD TYPE Direct Mount
OIL TYPE R134 Pag 46
CLUTCH DIAMETER 125.5mm, 4.941"
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
COIL POSITION N/A
GAUGE LINE 64mm, 2.52"C

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $500.00

UJD999635 Compressor - Replaces MIA10103

UJD999635 Compressor - Replaces MIA10103
Compressor SCSA06C - 104mm, 6 Groove Clutch, 12V

Replaces MIA10103, 503-1853

Fits JOHN DEERE: 4320 Utility, 4520 Utility, 4720 Utility

Specifications
COMPRESSOR TYPE SCSA06C
HEAD TYPE Direct Mount
OIL TYPE R134 ND-Oil 8 Pag 46
CLUTCH DIAMETER 4.1" 104mm
VOLTAGE 12
GROOVES 6
BELT WIDTH .80
COIL POSITION N/A
OIL QUANTITY 3oz
GAUGE LINE N/A

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $550.00

UJD999636 Compressor Denso - Replaces MIA10103

UJD999636 Compressor Denso - Replaces MIA10103
OE Denso Compressor SCSA06C - 104mm, 6 Groove Clutch, 12V

Replaces MIA10103, 503-185

Fits JOHN DEERE: 4320 Utility, 4520 Utility, 4720 Utility

Specifications
COMPRESSOR TYPE SCSA06C
HEAD TYPE Direct Mount
OIL TYPE R134 ND-Oil 8 Pag 46
CLUTCH DIAMETER 4.1" 104mm
VOLTAGE 12
GROOVES 6
BELT WIDTH .80
COIL POSITION N/A
OIL QUANTITY 3oz
GAUGE LINE 71mm, 2.795"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $615.00

UJD999680 Compressor - Replaces RE12513

UJD999680 Compressor - Replaces RE12513
Heavy Duty Sanden Style Denso 7H15 - 146mm, Single Groove Clutch, 12V,

Includes Compressor and High & Low Side Manifolds

Replaces RE12513, 503-1172

Fits JOHN DEERE: 4055, 4255, 4455, 4755, 4955
4050, 4250, 4450, 4650, 4850

Specifications
COMPRESSOR TYPE 7H15
OIL TYPE Assembly Oil
CLUTCH DIAMETER 146mm, 5.76"
VOLTAGE 12
GROOVES 1
BELT WIDTH .50, 1/2"
COIL POSITION 12 o’clock
OIL QUANTITY 6.5 oz
GAUGE LINE 47.5mm, 1.86"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $410.00

UJD999681 Compressor Replacement Kit - RE12513

UJD999681 Compressor Replacement Kit - RE12513
HD Sanden Style Denso 7H15 - 146mm, Single Groove Clutch, 12V

Replaces RE12513, AR99850, RE57936, AH116654, 503-117

Fits JOHN DEERE: 4055, 4255, 4455, 4555
4755 (Serial Number 010678 and Below)
4955 (Serial Number 010370 and Below)
4050, 4250, 4450, 4650, 4850

Will Not Fit John Deere Models 2250, 2450, 2650, 2650N, 2850, 2355,
2555, 2755, 2855N, 2955, 3050, 3350, 3650, 3055, 3155, 3255 With John Deere AL63652 Compressor Mounting Bracket

Sanden Style Version of Original 6E171 Denso

Specifications
COMPRESSOR TYPE 7H15
OIL TYPE Assembly Oil
CLUTCH DIAMETER 5.76"
VOLTAGE 12
GROOVES 1
BELT WIDTH .50, 1/2"
COIL POSITION 12 o’clock
OIL QUANTITY 6.5 oz.
GAUGE LINE 47.5mm, 1.86"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $345.00

UJD999701 A6 to Sanden Conversion Kit - Replaces 990-401

UJD999701 A6 to Sanden Conversion Kit - Replaces 990-401
A6 to Sanden Conversion Kit

Replaces 990-401

Fits JOHN DEERE: 2940, 2950 (Early SN 510768 and Below), 3040 (Early SN 510768 and Below), 3140 (Early SN 510768 and Below)

Replaces A6 Compressor
Kit allows for the use of the original belt

Kit Inclutes
COMPRESSOR, MOUNTING HARDWARE, BINARY SWITCHES, COMPRESSOR MANIFOLD, RETROFIT ADAPTERS, O-RING, MOUNTING BRACKETS

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $600.00

UJD999803 A6 Delco Replacement Compressor - Replaces AT64486

UJD999803 A6 Delco Replacement Compressor - Replaces AT64486
New Heavy Duty A6 Delco Replacement - 24 Volt with 7" Clutch and Dust Protection

Replaces - AT64486, SE501473, SE501458, AT163751, TY6771, 500-084

Fits JOHN DEERE: 7610 (SN 818908 and Below)

Replaces A6 w/10PA20 HD 10 Cylinder Denso. Uses Less Power for Greater Efficiency
Uses Original Belt and Hoses. Can be Used for 10:00 and 2:00 Coil Positions. Includes HD Dust Protection and Metric Bolt Kit

Specifications
COMPRESSOR TYPE 10PA20HD
HEAD TYPE Super Heat Switch
OIL TYPE Pag 46v
CLUTCH DIAMETER 6.77"
VOLTAGE 24
GROOVES 1
BELT WIDTH .50, 1/2"
COIL POSITION 10 and 2 O’Clock
MOUNTING HOLES Metric Thread
OIL QUANTITY 7 oz

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $410.00

UJD999820 Compressor with Manifold - Replaces SE501462

UJD999820 Compressor with Manifold - Replaces SE501462
OE Denso Compressor 10PA17C - 146mm, 8 Groove Clutch, 12V - with Manifold

Replaces SE501462, AH169875, TY6764, RE46609, 447100-2380, RE69716, TY24304, 447170-2400, 503-141

Fits JOHN DEERE:
5225, 5325, 5425, 5525, 5625,
5095(SN 346999 and Below),
6100D, 6110D,
6115D(SN 050000 & below),
6125D,
6130D(SN 05000 & belolw),
6140D,
7200, 7400, 7600, 7700, 7800,
7210, 7410, 7510, 7610, 7710, 7810,
7720, 7820, 7920,
8110, 8210, 8310, 8410, 8100, 8200, 8300, 8400,
8120, 8220, 8320, 8420, 8520,
8130, 8230, 8330, 8430, 8530

Specifications
COMPRESSOR TYPE 10PA17C
HEAD TYPE N/A
OIL TYPE ND8 Pag Oil
CLUTCH DIAMETER 5.748", 146mm
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
OIL QUANTITY 7.77 oz, 230cc
GAUGE LINE 50.07mm 1.97"C, 63.5mm 2.5"F
MANIFOLD 451-1180

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $600.00

UJD999849 Compressor - Replaces AL176858

UJD999849 Compressor - Replaces AL176858
Alternative Denso Compressor 10PA15C - 124.5mm, 8 Groove Clutch, 12V without Manifold

Replaces AL176858, SE503066, 503-12163

Fit JOHN DEERE: 6230, 6330, 6430
6165J

Specifications
COMPRESSOR TYPE 10PA15C
HEAD TYPE N/A
OIL TYPE Pag 46
CLUTCH DIAMETER 4.901", 124.5mm
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
OIL QUANTITY 5.4 oz.
GAUGE LINE 38.40mm, 1.52" C, 52.5mm, 2.08" F

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $365.00

UJD999850 Compressor Denso - Replaces AL176858

UJD999850 Compressor Denso - Replaces AL176858
Denso Compressor 10PA15C - 124.5mm, 8 Groove Clutch, 12V w/o Manifold

Replaces AL176858, SE503066, 503-12162

Fits JOHN DEERE:
6230, 6330, 6430
6165J

Specifications
COMPRESSOR TYPE 10PA15C
HEAD TYPE N/A
OIL TYPE Pag 46
CLUTCH DIAMETER 4.901", 124.5mm
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
OIL QUANTITY 5.4 oz.
GAUGE LINE 38.40mm, 1.52" C, 52.5mm, 2.08" F

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $515.00

UJD999851 Compressor Denso with Manifold - Replaces AL176858

UJD999851 Compressor Denso with Manifold - Replaces AL176858
OE Denso Compressor 10PA15C - 124.5mm, 8 Groove Clutch, 12V with Manifold

Replaces AL176858, 503-1216

Fits JOHN DEERE:
6230, 6330, 6430
6165J

Specifications
COMPRESSOR TYPE 10PA15C
HEAD TYPE N/A
OIL TYPE ND8 Pag Oil
CLUTCH DIAMETER 4.901", 124.5mm
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
OIL QUANTITY 5.4 oz.
GAUGE LINE 38.40mm, 1.52" C, 52.5mm, 2.08" F

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $550.00

UJD999879 Compressor - Replaces AL78779

UJD999879 Compressor - Replaces AL78779
OE Denso Compressor 10PA15C - 124.5mm, 8 Groove Clutch 12V

Replaces AL154203, 77700042614, AL78493, SE503057, AL174136, AL174137, RE203758, AL153386, AL176857, AL78779, RE257084, SE501466, SE502882, AL155836, TY6769, 0010286831, 7700042614, 503-120

Fits JOHN DEERE: 6200, 6300, 6400
6110, 6210, 6310, 6410, 6510 - will require use of original manifold
6140J, 6145J, 6155J
6215, 6415, 6615, 6715,
6120, 6220, 6320, 6420
7220, 7320, 7420, 7520MFWD

Specifications
COMPRESSOR TYPE 10PA15C
HEAD TYPE N/A
OIL TYPE ND8 Pag Oil
CLUTCH DIAMETER 4.901", 124.5mm
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
OIL QUANTITY 5.4 oz.
GAUGE LINE 38.40mm, 1.52" C, 52.5mm, 2.08" F

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $495.00

UJD99024 Compressor - Replaces AL78779

UJD99024 Compressor - Replaces AL78779
Alternative Denso Compressor 10PA15C - 124.5mm, 8 Groove Clutch, 12V, Must Use Original Manifold

Replaces number AL78779, TY6769, AL155836, AL174137, RE203758, RE257084, 503-1203

Fits JOHN DEERE: 6200, 6300, 6400,
6110, 6210, 6310, 6410, 6510,
6215, 6415, 6615, 6715,
6120, 6220, 6320, 6420
7220, 7320, 7420, 7520MFWD

Specifications
COMPRESSOR TYPE 10PA15C
HEAD TYPE N/A
OIL TYPE Pag 46
CLUTCH DIAMETER 4.901", 124.5mm
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
OIL QUANTITY 5.4 oz.
GAUGE LINE 38.40mm, 1.52" C, 52.5mm, 2.08" F

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $355.00

UJD999903 A6 to Sanden Conversion Kit - Replaces 990-400

UJD999903 A6 to Sanden Conversion Kit - Replaces 990-400
A6 to Sanden Conversion Kit

Replaces 990-400

Fits JOHN DEERE:

2955 (SN 663473 and Below), 3155 (SN 663473 and Below),

3040 (Fits Models Already Equipped With OE Bracket # AL58832 With Late SN 510769 and Above),

3140 (Fits Models Already Equipped With OE Bracket # AL58832 With Late SN 510769 and Above),

2950 (Fits Models Already Equipped With OE Bracket # AL58832 With Late SN 510769 and Above),

3150

Replaces A6 Compressor, Kit allows for the use of the original hoses and belt

Specifications
COMPRESSOR 509-571
MOUNTING HARDWARE Yes
BELT No
BINARY SWITCHES 220-207, 220-3085
COMPRESSOR MANIFOLD 451-11602
SERVICE VALVES No
RETROFIT ADAPTERS 461-3098, 461-3099
HOSES No
O-RINGS No
MOUNTING BRACKET 995-440

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $525.00

UJD999904 Nippondenso to Sanden Conversion Kit - Replaces TY6626

UJD999904 Nippondenso to Sanden Conversion Kit - Replaces TY6626
New Sanden Conversion Kit - Replaces Nippondenso

Nippondenso to Sanden Conversion Kit

For Tractors with Compressor Mounted on Left Side of Pivot Pin

Replaces TY6626, TY6766, 990-431

Fits JOHN DEERE: 2355 (SN 663474 and Above), 2555 (SN 663474 and Above), 2755 (SN 663474 and Above), 2855N (SN 663474 and Above), 2955 (SN 663474 and Above), 3155 (SN 663474 and Above), JD 50, 55 Series Utility Tractors

For Tractors with Compressor Mounted on Left Side of Pivot Pin

Replaces Nippondenso Compressor with Rotary Style Compressor and
Replaces Mounting Bracket AL63652
For Tractors with Compressor Mounted on Upper Left Side of Engine Only

Specifications
COMPRESSOR 509-576
COMPRESSOR MANIFOLD 451-1152
SERVICE VALVES 451-6263K
O-RINGS 440-015, 440-013
MOUNTING BRACKET 995-441

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $480.00

UJD999905 A6 to Sanden Conversion Kit - Replaces 990-4202

UJD999905 A6 to Sanden Conversion Kit - Replaces 990-4202
Brackets Mount To Original A6 Mounting Brackets, Uses Original Hoses

Replaces 990-4202

Fits JOHN DEERE: 2355 (SN 663473 and Below with Idler Pulley), 2555 (SN 663473 and Below with Idler Pulley), 2755 (SN 663473 and Below with Idler Pulley), 2855N (SN 663473 and Below with Idler Pulley)

Specifications
COMPRESSOR 509-571
MOUNTING HARDWARE Yes
BELT 9-AP72
BINARY SWITCHES 220-207, 220-3085, 110-0802
COMPRESSOR MANIFOLD 451-11602
SERVICE VALVES No
RETROFIT ADAPTERS 461-3098, 461-3099
HOSES No
O-RINGS 440-211
MOUNTING BRACKET 995-435

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $485.00

UJD999906 Compressor Kit - Replaces 890-1161

UJD999906 Compressor Kit - Replaces 890-1161
Compressor Kit, Kit Includes Denso Style Compressor, Receiver Drier, Expansion Valve, and O-Rings

Replaces 890-1161

Fits: 2355 (SN 663474 and Above), 2555, 2755, 2855N, 2955, 3155

Kit Includes Compressor, Receiver Drier, Expansion Valve, and O-Rings

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $505.00

UJD999907 Compressor Denso Replacement with Manifold - Replaces RE57936

UJD999907 Compressor Denso Replacement with Manifold - Replaces RE57936
Alternative Denso Compressor 6E171 - 146mm, Single Groove Clutch, 12V

Replaces RE57936, SE501464, AH116654, SE501460, RE12513, 503-1162

Fits JOHN DEERE: 2355 (SN 663474 and Above), 2555 (SN 663474 and Above), 2755 (SN 663474 and Above), 2855N (SN 663474 and Above), 2955 (SN 663474 and Above), 3155 (SN 663474 and Above),
4050, 4250, 4450, 4650, 4850

Alternate Version of a 6E171 Denso Direct Replacement with Manifold

Replaces 6E171 With 10H20E HD 10 Cylinder Compressor, Mounting Ear Thread Size – 10mm, 1.25 Pitch

Specifications
COMPRESSOR TYPE 6E171
CLUTCH DIAMETER 5.76"
VOLTAGE 12
GROOVES 1
BELT WIDTH .50, 1/2"
OIL QUANTITY 8 oz.
GAUGE LINE 47.5mm, 1.86"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $495.00

UJD999908 Compressor Denso Replacement - Replaces TY6626

UJD999908 Compressor Denso Replacement - Replaces TY6626
OE Style Denso Compressor 6E171 - 146mm, Single Groove Clutch, 12V

Replaces TY6626, TY6766, RE125513, SE501460, SE501464, RE57936, SE503051, AH116654, AR99850, SE503049, A165850, 503-116

Fits JOHN DEERE: 2355 (SN 663474 and Above), 2555 (SN 663474 and Above), 2755 (SN 663474 and Above), 2855N (SN 663474 and Above), 2955 (SN 663474 and Above), 3155 (SN 663474 and Above),
4055, 4255, 4455, 4555
4755 (SN 010678 and Below)
4955 (SN 010370 and Below)
4050, 4250, 4450, 4650, 4850

Will Not Fit John Deere Models 2250, 2450, 2650, 2650N, 2850, 2355,
2555, 2755, 2855N, 2955, 3050, 3350, 3650, 3055, 3155, 3255 With John Deere AL63652 Compressor Mounting Bracket

Specifications
COMPRESSOR TYPE 6E171
OIL TYPE Pag 46
CLUTCH DIAMETER 5.76"
VOLTAGE 12
GROOVES 1
BELT WIDTH .50, 1/2"
OIL QUANTITY 8 oz.
GAUGE LINE 47.5mm, 1.86"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $430.00

UJD999909 Compressor A6 Replacement - Replaces SE501456

UJD999909 Compressor A6 Replacement - Replaces SE501456
New Heavy Duty Aluminum A6 Replacement Compressor with Hi & Lo Pressure Update Kit

Replaces SE501456, SE501457, TY6665, TY6770, AR92109, RE60697, 595995M91, 70272976, 500-0752

Fits JOHN DEERE: 2355, 2555, 2755, 2855N, 2955, 3155,
2350, 2550, 2750, 2950
2940
4520
4030, 4230, 4430, 4630
4040, 4240, 4440, 4640, 4840
7520-4WD

Replaces A6 with 10PA20 - 10 Cylinder Denso, Includes Hi & Lo Pressure Update Kit and Dust Protection
Uses Original Belt & Hoses - Can be used for 10 and 2 O’Clock Coil Positions

Specifications
COMPRESSOR TYPE 10PA20HD
HEAD TYPE Hi and Lo
OIL TYPE Pag 46
CLUTCH DIAMETER 5.58"
VOLTAGE 12
GROOVES 1
BELT WIDTH 1/2"
MOUNTING HOLES Metric Thread
OIL QUANTITY 7 oz.

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $510.00

UJD999910 Compressor A6 with Clutch - Replaces SE501457

UJD999910 Compressor A6 with Clutch - Replaces SE501457
A6 Compressor - 10 o’clock 5.58" CL Superheat, 12V, Includes Superheat Switch

Replaces SE501457, 595995M91, 500-013

Fits JOHN DEERE:
2355, 2555, 2755, 2855N, 2955, 3155,
2350, 2550, 2750, 2950
2940
4030, 4230, 4430, 4630
4520
4040, 4240, 4440, 4640, 4840
7520-4WD

Specifications
HEAD TYPE Superheat
OIL TYPE R134 Pag Oil
CLUTCH DIAMETER 5.58"
GROOVES 1
BELT WIDTH 1/2"
COIL POSITION 10 o’clock
MOUNTING HOLES Metric Thread
OIL QUANTITY 10-12 oz.
VOLTAGE 12
COMPRESSOR TYPE A-6

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $630.00

UA98216 Compressor - Replaces TY6665

UA98216 Compressor - Replaces TY6665
New Heavy Duty A6 Delco Replacement Compressor with Dust Protection

Replaces number UM7004, UA98216, 70256782, 70272002, 70269745, 70262126, SE501456, SE501457, TY6665, TY6770, 586126M91, 533713M91, SE503046, SE503047, 500-075

Fits JOHN DEERE: 2355, 2555, 2755, 2855N, 2955, 3155,
2350, 2550, 2750, 2950
2940
4520
4030, 4230, 4430, 4630
4040, 4240, 4440, 4640, 4840
7520-4WD

Fits ALLIS CHALMERS: 200, 210, 220, 7000, 7010, 7020, 7040, 7050, 7060, 7080

Fits MASSEY FERGUSON: 1080 (Must Identify Clutch Diameter), 1085 (Must Identify Clutch Diameter), 1100 (Must Identify Clutch Diameter), 1105 (Must Identify Clutch Diameter), 1130 (Must Identify Clutch Diameter), 1135 (Must Identify Clutch Diameter), 1150 (Must Identify Clutch Diameter), 1155 (Must Identify Clutch Diameter), 1805 (Must Identify Clutch Diameter), 2640 (Must Identify Clutch Diameter), 2675 (Must Identify Clutch Diameter), 2705 (Must Identify Clutch Diameter), 2745 (Must Identify Clutch Diameter), 2775 (Must Identify Clutch Diameter), 2805 (Must Identify Clutch Diameter), 3505 (Must Identify Clutch Diameter), 3525 (Must Identify Clutch Diameter), 3545 (Must Identify Clutch Diameter), 4800 (Must Identify Clutch Diameter), 4840 (Must Identify Clutch Diameter), 4880 (Must Identify Clutch Diameter), 4900 (Must Identify Clutch Diameter)

Uses Original Belt & Hoses, Can be Used for 10 O’Clock and 2 O’Clock Coil Positions, Includes HD Dust Protection and Metric Bolt Kit

Replaces A6 With 10PA20 HD 10 Cylinder Denso, Uses Less Power for Greater Efficiency

Specifications
COMPRESR TYPE 10PA20HD
HEAD TYPE Superheat
OIL TYPE Pag 46
CLUTCH diameter 5.58"
VOLTAGE 12
GROOVES 1
BELT WIDTH 1/2"
MOUNTING holes Metric Thread
OIL QUANTITY 7.4 oz

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $500.00

UJD999912 Manifold Kit - Replaces 451-1173K

UJD999912 Manifold Kit - Replaces 451-1173K
Nippondenso Manifold Kit

Includes Suction and Discharge Manifolds and a Pressure Relief Valve

Replaces: RE10981, RE10980, 451-1173K

Fits UJD999908 & UJD999681 Compressor

Price: $78.00

UJD999942 Compressor Denso - Replaces RE196923

UJD999942 Compressor Denso - Replaces RE196923
OE Denso Compressor 10PA17C - 125mm, 6 Groove Clutch, 12V

Replaces RE196923, 503-139

Fits JOHN DEERE:
5225, 5325,
5065M (SN 346999 and Below)

Must Use Original Manifold
Top Mounting Holes Center to Center = 5.0", Bottom Mounting Holes Center to Center = 4.6"

Specifications
COMPRESSOR TYPE 10PA17C
OIL TYPE ND8 Pag Oil
CLUTCH DIAMETER 125mm, 4.92"
VOLTAGE 12
GROOVES 6
BELT WIDTH Serpentine
OIL QUANTITY 7.77 oz, 230cc
GAUGE LINE 1.80"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $480.00

UJD999952 Compressor Manifold - Replaces RE51052

UJD999952 Compressor Manifold - Replaces RE51052
Includes Cap and Pressure Relief Valve

Replaces RE51052, RE69715, 451-1180

Fits JOHN DEERE:
5410, 5510,
5101E,
8100, 8200, 8300, 8400

Price: $120.00

UJD999953 Compressor Manifold - Replaces RE51052

UJD999953 Compressor Manifold - Replaces RE51052
Compressor Manifold - Alternative, Includes R134a Service Valve Cap

Replaces RE51052, RE69715, 451-11803

Fits JOHN DEERE:
5410, 5510,
5101E,
8100, 8200, 8300, 8400

Price: $65.00

UJD999970 Compressor Kit - Replaces 890-1401

UJD999970 Compressor Kit - Replaces 890-1401
Must Use Original Manifold
Kit Includes Compressor, Receiver Drier, Expansion Valve, and O-Rings

Replaces RE46609, SE501462, TY6764, 447100-2380, RE69716, TY24304, 447170-2400, AH169875, 890-1401

Fits JOHN DEERE: 5420, 5520, 5410, 5510, 5225, 5325, 5425, 5625
7210, 7410, 7510, 7610, 7710, 7810

Kit Includes 503-140 Compressor with Receiver Drier, Expansion Valve 903-725 with #12 Outlet Port , and O-Rings

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $600.00

UJD999971 Compressor - Replaces RE46609

UJD999971 Compressor - Replaces RE46609
Alternative Denso Compressor 10PA17C - 146mm, 8 Groove Clutch, 12V

Replaces RE46609, SE501462, TY6764, 447100-2380, RE69716, TY24304, 447170-2400, AN221429, AH169875, 503-1403

Fits JOHN DEERE: 5420, 5520, 5225, 5325, 5425, 5525, 5625,
5410, 5510,
5101E(SN 340000 and Below),
7200, 7400, 7600, 7700, 7800,
7210, 7410, 7510, 7610, 7710, 7810,
7720, 7820, 7920,
8110, 8210, 8310, 8410,
8100, 8200, 8300, 8400,
8120, 8220, 8320, 8420, 8520,
8130, 8230, 8330, 8430, 8530

Specifications
COMPRESSOR TYPE 10PA17C
HEAD TYPE N/A
OIL TYPE R134 Pag Oil 46V
CLUTCH DIAMETER 5.748", 146mm
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
GAUGE LINE 50.07mm 1.97"C; 63.5mm, 2.5"F

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $350.00

UJD999972 Compressor - Replaces RE46609

UJD999972 Compressor - Replaces RE46609
Must Use Original Manifold, OE Denso Compressor 10PA17C - 146mm, 8 Groove Clutch, 12V

Replaces RE46609, SE501462, TY6764, 447100-2380, RE69716, TY24304, 447170-2400, AH169875, 503-140

Fits JOHN DEERE: Must Use Original Manifold
5420, 5520, 5225, 5325, 5425, 5525, 5625,
5410, 5510,
5101E(SN 340000 and Below),
5095M(SN 346999 and Below),
6100D, 6110D,
6115D(SN 050000 & below),
6125D,
6130D(SN 050000 & below),
6140D,
7200, 7400, 7600, 7700, 7800,
7720, 7820, 7920,
8110, 8210, 8310, 8410,
8100, 8200, 8300, 8400,
8120, 8220, 8320, 8420, 8520,
8130, 8230, 8330, 8430, 8530

Must Use Original Manifold

Specifications
COMPRESSOR TYPE 10PA17C
HEAD TYPE N/A
OIL TYPE ND8 Pag Oil
CLUTCH DIAMETER 5.748", 146mm
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
OIL QUANTITY 7.77 oz, 230cc
GAUGE LINE 50.07mm 1.97"C, 63.5mm 2.5"F

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $525.00

UJD999973 Compressor - Replaces RE64024

UJD999973 Compressor - Replaces RE64024
Alternative Denso Compressor 10PA17C - 146mm, Single Groove Clutch, 12V, Must Use Original Manifold

Replaces TY6789, RE64024, 447100-8150, 503-1253

Fits JOHN DEERE: Must Use Original Manifold
5220, 5320, 5200, 5300, 5400, 5500, 5210, 5310, 5075E

Must Use Original Manifold

Specifications
COMPRESSOR TYPE 10PA17C
HEAD TYPE N/A
OIL TYPE R134 Pag Oil
CLUTCH DIAMETER 5.748", 146mm
VOLTAGE 12
GROOVES 1
BELT WIDTH 1/2"
OIL QUANTITY 7.77 oz, 230cc
GAUGE LINE 54mm, 2.125"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $375.00

UJD999974 Compressor - Replaces RE64024

UJD999974 Compressor - Replaces RE64024
OE Denso Compressor 10PA17C - 146mm, 1 Groove Clutch, 12V, Must Use Original Manifold

Replaces RE64024, TY6789, 447100-8150, SE501472, 447100-8154, 503-125

Fits JOHN DEERE: Must Use Original Manifold
5220, 5320 - All serial numbers, 5200, 5300, 5400, 5500, 5210, 5310
5075E

Must Use Original Manifold

Specifications
COMPRESSOR TYPE 10PA17C
HEAD TYPE N/A
OIL TYPE ND8 Pag Oil
CLUTCH DIAMETER 5.748", 146mm
VOLTAGE 12
GROOVES 1
BELT WIDTH 1/2"
OIL QUANTITY 7.77 oz, 230cc
GAUGE LINE 54mm, 2.125"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge

Price: $525.00

Walt's Tractor Parts | John Deere Tractor Parts -- | John Deere Cab Parts - | Air Conditioning Parts |  Compressor

Recently Viewed Parts


Customer Services

Website Information

How to get in touch with us

Call us on
888-414-4043888-414-4043

Waltstractors.com
2634 Audrain Road 381, Mexico, Missouri, 65265

Buy now with PayPal

© 2014 - 2024 Waltstractors.com