UJD999903 A6 to Sanden Conversion Kit - Replaces 990-400

A6 to Sanden Conversion Kit

Replaces 990-400

Fits JOHN DEERE:

2955 (SN 663473 and Below), 3155 (SN 663473 and Below),

3040 (Fits Models Already Equipped With OE Bracket # AL58832 With Late SN 510769 and Above),

3140 (Fits Models Already Equipped With OE Bracket # AL58832 With Late SN 510769 and Above),

2950 (Fits Models Already Equipped With OE Bracket # AL58832 With Late SN 510769 and Above),

3150

Replaces A6 Compressor, Kit allows for the use of the original hoses and belt

Specifications
COMPRESSOR 509-571
MOUNTING HARDWARE Yes
BELT No
BINARY SWITCHES 220-207, 220-3085
COMPRESSOR MANIFOLD 451-11602
SERVICE VALVES No
RETROFIT ADAPTERS 461-3098, 461-3099
HOSES No
O-RINGS No
MOUNTING BRACKET 995-440

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge