UJD999904 Nippondenso to Sanden Conversion Kit - Replaces TY6626

New Sanden Conversion Kit - Replaces Nippondenso

Nippondenso to Sanden Conversion Kit

For Tractors with Compressor Mounted on Left Side of Pivot Pin

Replaces TY6626, TY6766, 990-431

Fits JOHN DEERE: 2355 (SN 663474 and Above), 2555 (SN 663474 and Above), 2755 (SN 663474 and Above), 2855N (SN 663474 and Above), 2955 (SN 663474 and Above), 3155 (SN 663474 and Above), JD 50, 55 Series Utility Tractors

For Tractors with Compressor Mounted on Left Side of Pivot Pin

Replaces Nippondenso Compressor with Rotary Style Compressor and
Replaces Mounting Bracket AL63652
For Tractors with Compressor Mounted on Upper Left Side of Engine Only

Specifications
COMPRESSOR 509-576
COMPRESSOR MANIFOLD 451-1152
SERVICE VALVES 451-6263K
O-RINGS 440-015, 440-013
MOUNTING BRACKET 995-441

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge