UJD999905 A6 to Sanden Conversion Kit - Replaces 990-4202

Brackets Mount To Original A6 Mounting Brackets, Uses Original Hoses

Replaces 990-4202

Fits JOHN DEERE: 2355 (SN 663473 and Below with Idler Pulley), 2555 (SN 663473 and Below with Idler Pulley), 2755 (SN 663473 and Below with Idler Pulley), 2855N (SN 663473 and Below with Idler Pulley)

Specifications
COMPRESSOR 509-571
MOUNTING HARDWARE Yes
BELT 9-AP72
BINARY SWITCHES 220-207, 220-3085, 110-0802
COMPRESSOR MANIFOLD 451-11602
SERVICE VALVES No
RETROFIT ADAPTERS 461-3098, 461-3099
HOSES No
O-RINGS 440-211
MOUNTING BRACKET 995-435

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge