UJD999907 Compressor Denso Replacement with Manifold - Replaces RE57936

Alternative Denso Compressor 6E171 - 146mm, Single Groove Clutch, 12V

Replaces RE57936, SE501464, AH116654, SE501460, RE12513, 503-1162

Fits JOHN DEERE: 2355 (SN 663474 and Above), 2555 (SN 663474 and Above), 2755 (SN 663474 and Above), 2855N (SN 663474 and Above), 2955 (SN 663474 and Above), 3155 (SN 663474 and Above),
4050, 4250, 4450, 4650, 4850

Alternate Version of a 6E171 Denso Direct Replacement with Manifold

Replaces 6E171 With 10H20E HD 10 Cylinder Compressor, Mounting Ear Thread Size – 10mm, 1.25 Pitch

Specifications
COMPRESSOR TYPE 6E171
CLUTCH DIAMETER 5.76"
VOLTAGE 12
GROOVES 1
BELT WIDTH .50, 1/2"
OIL QUANTITY 8 oz.
GAUGE LINE 47.5mm, 1.86"

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge