UJD999971 Compressor - Replaces RE46609

Alternative Denso Compressor 10PA17C - 146mm, 8 Groove Clutch, 12V

Replaces RE46609, SE501462, TY6764, 447100-2380, RE69716, TY24304, 447170-2400, AN221429, AH169875, 503-1403

Fits JOHN DEERE: 5420, 5520, 5225, 5325, 5425, 5525, 5625,
5410, 5510,
5101E(SN 340000 and Below),
7200, 7400, 7600, 7700, 7800,
7210, 7410, 7510, 7610, 7710, 7810,
7720, 7820, 7920,
8110, 8210, 8310, 8410,
8100, 8200, 8300, 8400,
8120, 8220, 8320, 8420, 8520,
8130, 8230, 8330, 8430, 8530

Specifications
COMPRESSOR TYPE 10PA17C
HEAD TYPE N/A
OIL TYPE R134 Pag Oil 46V
CLUTCH DIAMETER 5.748", 146mm
VOLTAGE 12
GROOVES 8
BELT WIDTH Serpentine
GAUGE LINE 50.07mm 1.97"C; 63.5mm, 2.5"F

Compressor Warranty Notice: Failure to provide work order and follow these 8 steps when installing compressor will void warranty. Any questions, please ask.
1.Check compressor clutch prior to installation for proper air gap and any misalignment.
2.Check compressor for proper oil amount per OEM or manufacturers recommendation.
3.Must flush Air Conditioning system with proper flush and flushing method including replacement of new hoses, condenser and/or evaporator.
4.Must replace expansion valve or orifice tube.
5.Check for proper airflow through cooling fins of condenser and radiator. Replace if needed.
6.Must replace filter drier or accumulator.
7.Evacuate system to deep vacuum, 29.95 in. -HG, inches of vacuum.
8.Check for correct gas charge